Wings

 

​Light Monkey wings are 100% manufactured in the USA and the final assembly takes place in our factory in Lake City, Florida. We use the highest quality materials available.



The outer bag is 1680 denier ballistic nylon, chosen for its tear strength and abrasion resistance.



The bladder is 15mil virgin medical-grade polyether urethane. Polyether (as opposed to polyester) is better suited for water-exposed applications.  Its stretch prevents point loads on the welds and is the best fit with our denier ballistic nylon outer bag; this makes for a much quieter wing than nylon-laminated bladders.



The zipper is a 10mm Vislon non-corrosive zipper with locking slider. This is a standard in zippers for marine applications. You will find the same one on boat tops, sail covers, etc.

 

Wings include a 13" (33 cm) crushproof hose, two EDM bands for hose routing, and a standard k-style power inflator.